QUICK
DISCONNECTS

LS Series

Require fewer spares and experience less coupler-related vehicle down time, reducing repair requirements.


PRESSURE 1,000psi

SIZES
3/8" - 1 1/2"

NOMINAL FLOW
0.297" - 1.314"

HP Series

The only high pressure quick connect fluid coupling series available designed first to meet MIL-DTL-25427B.


PRESSURE 5,000psi

SIZES
3/8" - 1"

NOMINAL FLOW
0.297" - 0.845"

LP Series

Built with our most advanced features, LP Series is a true evolution to the LS Series while retaining and improving upon all previous features.

PRESSURE
600psi

SIZES
3/8" - 1 1/2"

NOMINAL FLOW
1.314"

HT Series

The HT series is a high-performance, high pressure, thread type coupling that can be coupled by hand or with the aid of a spanner tool to overcome *limited system pressure.

*CONTACT FACTORY FOR DETAILS


PRESSURE
28inHg to 4000psi

SIZES
1/4" - 1"

NOMINAL FLOW
0.297"

LT Series

The LT series is a high-performance, low pressure, thread type coupling that can be coupled by hand or with the aid of a spanner tool to overcome *limited system pressure.

*CONTACT FACTORY FOR DETAILS


PRESSURE
28inHg to 1000psi

SIZES
1/4" - 1"

NOMINAL FLOW
0.297"

HF Series

The epitome of efficiency, our HF series high-volume fluid transfer quick coupling is the best choice for your fuel and coolant system requirements.


PRESSURE 30psi

SIZES
2" - 3"

NOMINAL FLOW
n/a

ET Series

Introducing the Battlefield EnduroLink™ 2.0. The evolution of a legendary UAV quick disconnect coupler.


PRESSURE 150psi

SIZES
1/4" - 1 1/4"

NOMINAL FLOW
0.121" - 0.128"

EL Series

EnduroLink™ is the best choice for extreme temperature fuel applications when vibration and dusty conditions are unavoidable.


PRESSURE 28inHg to 150psi

SIZES
1/16" - 1/2"

NOMINAL FLOW
0.093" - 0.401"

DL Series

Based off of our world-standard EnduroLink™ couplers, DL Series enables connection and disconnection without any fluid loss.


PRESSURE 28inHg to 150psi

SIZES
1/8" - 1/2"

NOMINAL FLOW
0.097"

VL Series

Designed for heating engine oil lines in UAV’s to facilitate higher flight. The coupler comes with an access port for an internal heating electrode.


PRESSURE
28" to 150psi

SIZES
3/8" - 1/2"

NOMINAL FLOW
0.297"